General discussion • Re: RPi 5 as a desktop daily driver?
It's amazing how we have had so many posts in the past along the lines of "I would happily pay more for more RAM/faster CPU/RTC/Power button" and yet now we have those things people complain about the...
View ArticleGeneral discussion • Re: Question about nvme and official case
That is the--unproven and yet to be seen--expectation for the official M.2 adapter board. It's supposed to be released some time this quarter.For pure speculation...I would expect the RPL to attempt...
View ArticleNetworking and servers • Re: Fail2ban List
@dickon - I found what I was looking for at this url: [urlhttps://www.ustoopia.nl/technical/block-all-tra ... on-ubuntu/][/url]ThanksStatistics: Posted by timlab55 — Wed Jan 24, 2024 3:10 pm
View ArticleWanted • Re: Active cooler Push pins
ebay? https://www.ebay.co.uk/itm/404425946244 not sure if these are the right size, but others are available.Search for "heatsink push pins" or "heatsink mount pins)Also seen on Amazon UK and Digikey...
View ArticleHATs and other add-ons • Re: nvme base geekworm
BTW I'm using the Pimoroni base and took a bit of a gamble with this one: https://www.amazon.co.uk/dp/B0C48ML5KTIs that the sound you make when it breaks? These brand names look like somebody mashed...
View ArticleBeginners • Re: Raspberry Pi 4 - Programs not working properly
Hi, I'm currently connecting to the raspberry pi using Window's Remote Desktop Connection with XRDP on the raspberry. I switched from Wayland to X11 but the problem persists. I'm sorry for I don't...
View ArticleAutomation, sensing and robotics • Tap Detection using Adafruit ADXL345 QT
Hi,I am trying to build a wheeled robot which will stop when it bumps into something. I thought the Adafruit ADXL345 QT would do the trick and I have installed it on both a pi zero and pi 5.In both...
View ArticleMicroPython • Re: Pico W Micropython bootloader (Jan 2024) may have caused my...
Scruss and hippy,My apologies to you for alerting this forum that I had an issue that I documented on Github but then not responding here but only on github. Scruss, yes, you were initially correct in...
View ArticleCamera board • Re: HW Encoder V4l2 add support for intra refresh
Half the battle is understanding what the V4L2 controls are meant to be set to, and how that maps onto the MMAL encoder.I'm reading the V4L2 spec such that:- V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD...
View ArticleGraphics programming • Rpi4 GPU performance profiling
Hi,We're looking to squeeze as much as possible out of the Raspberry Pi 4's GPU which I know is relatively speaking low powered. Are there any GPU performance profiling tools for it? It would be handy...
View ArticleGeneral • Re: USB serial port - can RTS and CTS be used for signalling?
Better still, it's easy enough to implement two (or more!) CDC interfaces in the same device, which seems much closer to what you want.That's also what I would suggest.Statistics: Posted by hippy —...
View ArticleTroubleshooting • Re: Crontab reboot Pi 4 - odd behaviour
Thanks for the reply. I'll give those suggestions a go.Thank youStatistics: Posted by cappers — Wed Jan 24, 2024 3:29 pm
View ArticleGeneral discussion • Re: Power multiple PI 5
Could it be that safety regulations which attempt to make the world idiot proof don't much help?According to the companies/people who put their money where their mouth is, the insurance industry, the...
View ArticleCamera board • Re: RPi 5 and Camera Module 3 streaming
Try the following argument to your command:--libav-format mpegtsStatistics: Posted by naushir — Thu Jan 25, 2024 3:02 pm
View ArticleGeneral discussion • Re: I have rpi5 installed in sd card. What is the best...
https://github.com/RichardMidnight/pi-safeStatistics: Posted by twilightened — Thu Jan 25, 2024 3:05 pm
View ArticleTroubleshooting • Re: Led Strip Script help
Try putting a resistor from the Pi's gpio output to 3.3V, the 400 ohm resistor would do nicely, if not some value between 330 and 1kThere are at l;east two potential problems ...The input spec for the...
View ArticleTroubleshooting • Re: Cam cable fails - any way to revive? :-(
Hi!As I wrote, ceterum censeo. And I had to move the setup various times to connect/disconnect all these 12 or so cam cables. Hard to believe it is interference of a specific device.My solution: Keep...
View ArticleTroubleshooting • Re: hplip icon not showing on taskbar
Thanks. Which script would that be?Statistics: Posted by GavinW — Thu Jan 25, 2024 3:18 pm
View ArticleTroubleshooting • Re: Unable to make my 'eth0' connection autoconnect on startup
I have tried everything I can think of to understand why the Pi refuses to use the connection I'm managing, but I can't find anything.I tried grep:ing for the new connection UUID that is created after...
View ArticleBeginners • Re: Which package do I choose?
Which package would I need for my raspi pi5 with bookworm?https://nodejs.org/en/downloadAre you using the 32-bit or 64-bit version of RasPiOS Bookworm?Because clearly you don't want Windows, MacOS or...
View Article