a charger charges batteries.I'm running a Pi 3B off a known good PSU. Nevertheless, it constantly reports that it is throttled due to undervoltage.
Things I tried:
- Used both a 3A and a 10A Meanwell 5V power supply.
- Adjusted output voltage from 5.1 to 5.35V.
- Used a large diameter wire
- Shortened said wire to ~20cm
- Tried another Pi 3B
The issue ONLY occurs with this specific Pi. Voltage remains rock stable throughout booting and doing things.
Any ideas what else to check? Any onboard components that are known to go bad?
Thanks!
a normal power supply is a wire connected to a plug, not a usb.
Statistics: Posted by kerry_s — Wed Feb 28, 2024 11:05 pm