you can set the resolution manually:
in /boot/cmdline.txt (add to the front/end of the line, NOT a new line)
-- IMPORTANT NOTE: for Bookworm, the file is at /boot/firmware/cmdline.txt !!
video=HDMI-A-1:1024x768@60D
(or whatever resolution you want)
do this for both PI5
it should force output to that resolution even with no display connected.
note: video settings in config.txt are ignored by the newest KMS driver.
(at least resolution, not sure about hotplug.)
in /boot/cmdline.txt (add to the front/end of the line, NOT a new line)
-- IMPORTANT NOTE: for Bookworm, the file is at /boot/firmware/cmdline.txt !!
video=HDMI-A-1:1024x768@60D
(or whatever resolution you want)
do this for both PI5
it should force output to that resolution even with no display connected.
note: video settings in config.txt are ignored by the newest KMS driver.
(at least resolution, not sure about hotplug.)
Statistics: Posted by terribleted — Wed Feb 21, 2024 9:34 pm
