I can query current and voltages using vcgencmd pmic_read_adc, but I haven't found documentation that describes what systems these values are including.
For example, here is some output - for example how do I know what 3V7_WL_SW_[A,V] covers? How about the rest of the values?
For example, here is some output - for example how do I know what 3V7_WL_SW_[A,V] covers? How about the rest of the values?
vcgencmd pmic_read_adc
3V7_WL_SW_A current(0)=0.08880963A
3V3_SYS_A current(1)=0.06050766A
1V8_SYS_A current(2)=0.22056020A
DDR_VDD2_A current(3)=0.01366302A
DDR_VDDQ_A current(4)=0.00000000A
1V1_SYS_A current(5)=0.19811380A
0V8_SW_A current(6)=0.32888840A
VDD_CORE_A current(7)=1.02695000A
3V3_DAC_A current(17)=0.00000000A
3V3_ADC_A current(18)=0.00042735A
0V8_AON_A current(16)=0.00579975A
HDMI_A current(22)=0.00927960A
3V7_WL_SW_V volt(8)=3.66358600V
3V3_SYS_V volt(9)=3.30817700V
1V8_SYS_V volt(10)=1.80024200V
DDR_VDD2_V volt(11)=1.10146400V
DDR_VDDQ_V volt(12)=0.60036570V
1V1_SYS_V volt(13)=1.10915600V
0V8_SW_V volt(14)=0.80073180V
VDD_CORE_V volt(15)=0.72124470V
3V3_DAC_V volt(20)=3.30402600V
3V3_ADC_V volt(21)=3.30768900V
0V8_AON_V volt(19)=0.79824100V
HDMI_V volt(23)=5.10406000V
EXT5V_V volt(24)=5.10942000V
BATT_V volt(25)=0.00170940V
Statistics: Posted by spayno — Mon Feb 12, 2024 7:49 pm
