Same here.
Enclosure: UGREEN M.2 NVMe SSD Enclosure Adapter, 10Gbps USB C 3.2 Gen2
Adapter: Realtek Semiconductor Corp. RTL9210 M.2 NVME Adapter
Disk: Crucial P3 1TB PCIe 3.0 3D NAND NVMe M.2 SSD
PSU: Standard 27W PSU from Raspberry.
Mounts unreliably (starts, remounts, goes read-only, disappears) whether as bootfs/rootfs or as secondary drive.
Does not work with Raspberry OS. Does not work with Ubuntu OS.
But it works perfect so far with the older Raspberry Pi 4B on standard Raspberry 15W PSU.
RPI4 -- dmesg snippet:
Enclosure: UGREEN M.2 NVMe SSD Enclosure Adapter, 10Gbps USB C 3.2 Gen2
Adapter: Realtek Semiconductor Corp. RTL9210 M.2 NVME Adapter
Disk: Crucial P3 1TB PCIe 3.0 3D NAND NVMe M.2 SSD
PSU: Standard 27W PSU from Raspberry.
Mounts unreliably (starts, remounts, goes read-only, disappears) whether as bootfs/rootfs or as secondary drive.
Does not work with Raspberry OS. Does not work with Ubuntu OS.
But it works perfect so far with the older Raspberry Pi 4B on standard Raspberry 15W PSU.
RPI4 -- dmesg snippet:
The U1/U2 issues are both on RPI4 and RPI5 so not the problem probably.[ 2.019754] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 2.051672] usb 2-2: New USB device found, idVendor=0bda, idProduct=9210, bcdDevice=20.01
[ 2.051737] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.051775] usb 2-2: Product: Ugreen Storage Device
[ 2.051798] usb 2-2: Manufacturer: Ugreen
[ 2.051819] usb 2-2: SerialNumber: 01293805431E
[ 2.083138] usb 2-2: Enable of device-initiated U1 failed.
[ 2.084167] usb 2-2: Enable of device-initiated U2 failed.
[ 2.113312] usb 2-2: Enable of device-initiated U1 failed.
[ 2.114362] usb 2-2: Enable of device-initiated U2 failed.
[ 2.122027] scsi host0: uas
[ 2.443946] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode
[ 2.444629] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode
[ 2.561171] scsi 0:0:0:0: Direct-Access CT1000P3 SSD8 1.00 PQ: 0 ANSI: 6
[ 2.584602] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.586910] sd 0:0:0:0: [sda] Write Protect is off
[ 2.586950] sd 0:0:0:0: [sda] Mode Sense: 37 00 00 08
[ 2.589315] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.590646] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 2.590676] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes
[ 2.600358] sda: sda1 sda2
[ 2.601036] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.159274] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
Statistics: Posted by memag — Mon Dec 11, 2023 4:01 am