I am not sure what was the reason but I made working after i changed:
max_usb_current=1 in the /boot/config.txt
and
Changed usb <-> usb-c cable to the shorten one with 3A wrote on the plug
I had PSU_MAX_CURRENT=5000 earlier so it wasn't the point.
It's working but I still got undervoltage warning during rpi work. As you can see I plugged 7inch monitor into usb and have gpio to the relay board
max_usb_current=1 in the /boot/config.txt
and
Changed usb <-> usb-c cable to the shorten one with 3A wrote on the plug
I had PSU_MAX_CURRENT=5000 earlier so it wasn't the point.
It's working but I still got undervoltage warning during rpi work. As you can see I plugged 7inch monitor into usb and have gpio to the relay board
Statistics: Posted by gagarin93 — Tue Jun 25, 2024 9:46 am