Interfacing (DSI, CSI, I2C, etc.) • Re: Using MIPI DSI LCD on cm4

I solved it. I often unplugged and plugged the LCD FFC cable and it broke.

config.txt can be used as MIPI LCD if modified as below.
=======================================================================
lcd_ignore=1
dtoverlay=vc4-kms-v3d
dtoverlay=vc4-kms-dsi-generic,hactive=1280,vactive=800,four-lane

Statistics: Posted by Sonia_83 — Fri May 24, 2024 1:25 am

---