I have a fresh installed RPi4 Model B, with Raspbery OS.
With the original Rpi Touch-Display connected. No device on HDMI connected.
Set my language to german with UTF-8.
Screen works after install.
But when I updated (apt-get update + apt-get upgrade) and reboot, I have no screen any more!?!? Its booting, bit when desktop should load, I get a black screen.
dmesg (via SSH) reports:
[ 2.584903] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
[ 3.871094] vc4_dsi fe700000.dsi: transfer interrupt wait timeout
[ 3.871110] vc4_dsi fe700000.dsi: instat: 0x00000000
[ 3.871121] [drm:vc4_dsi_host_transfer [vc4]] *ERROR* DSI transfer failed, resetting: -110
[ 4.087097] tc358762 fe700000.dsi.0: error initializing bridge (-110)
[ 4.089779] Console: switching to colour frame buffer device 100x30
[ 4.091002] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device
What must be configured to run it?
Must be something added in config.txt?
I use normally arch, 'm not friendly with this Raspberry OS.
What is the Raspberry Pi default Display manager? It is X11 or already Wayland? How can I restart it in bash?
How Do I solve the issue
[drm:vc4_dsi_host_transfer [vc4]] *ERROR* DSI transfer failed, resetting: -110
?
It's frustrating google it, and no one has a light solution? I cannot imagine that this makes so much trouble on a fresh installed installation.
it is this display:
https://www.raspberrypi.com/products/ra ... h-display/
With the original Rpi Touch-Display connected. No device on HDMI connected.
Set my language to german with UTF-8.
Screen works after install.
But when I updated (apt-get update + apt-get upgrade) and reboot, I have no screen any more!?!? Its booting, bit when desktop should load, I get a black screen.
dmesg (via SSH) reports:
[ 2.584903] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
[ 3.871094] vc4_dsi fe700000.dsi: transfer interrupt wait timeout
[ 3.871110] vc4_dsi fe700000.dsi: instat: 0x00000000
[ 3.871121] [drm:vc4_dsi_host_transfer [vc4]] *ERROR* DSI transfer failed, resetting: -110
[ 4.087097] tc358762 fe700000.dsi.0: error initializing bridge (-110)
[ 4.089779] Console: switching to colour frame buffer device 100x30
[ 4.091002] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device
What must be configured to run it?
Must be something added in config.txt?
I use normally arch, 'm not friendly with this Raspberry OS.
What is the Raspberry Pi default Display manager? It is X11 or already Wayland? How can I restart it in bash?
How Do I solve the issue
[drm:vc4_dsi_host_transfer [vc4]] *ERROR* DSI transfer failed, resetting: -110
?
It's frustrating google it, and no one has a light solution? I cannot imagine that this makes so much trouble on a fresh installed installation.
it is this display:
https://www.raspberrypi.com/products/ra ... h-display/
Statistics: Posted by andu1111 — Fri May 10, 2024 1:06 pm