@6BY9
On the back of my HQ Camera "Raspberry Pi 2018 HQ Camera V1.0" On the box bar code 0 633696 492738.
On the Lens box LN037 a Arducam Model Number: On a sticker: CS2006ZM06 Purchase date 10 October 2023 from an Arducam Agent.
An Arducam Support person suggested that (based on LN037) the sensor in my HQ Camera is probably a Sony MX477 not a Sony IMX477.
If this is the case can the following be relied upon?
root@raspberrypi:~# libcamera-still --list-cameras
Available cameras
-----------------
0 : imx477 [4056x3040 12-bit RGGB] (/base/soc/i2c0mux/i2c@1/imx477@1a)
Modes: 'SRGGB10_CSI2P' : 1332x990 [30.00 fps - (0, 0)/0x0 crop]
'SRGGB12_CSI2P' : 2028x1080 [30.00 fps - (0, 0)/0x0 crop]
2028x1520 [30.00 fps - (0, 0)/0x0 crop]
4056x3040 [30.00 fps - (0, 0)/0x0 crop]
The login makes no difference with regard to the output.
The purchase options were:
https://www.arducam.com/product/b0240-a ... ty-camera/
Arducam 477P High Quality Camera for Raspberry Pi, 12.3MP 1/2.3 Inch HQ Camera Module with 6mm CS Lens for Pi 4B, 3B+, 2B, 3A+, Pi Zero and more
i.e. B0240
https://www.arducam.com/product/arducam ... h-with-mf/
Arducam Lens for Raspberry Pi HQ Camera, Wide Angle CS-Mount Lens, 6mm Focal Length with Manual Focus and Adjustable Aperture
i.e. LN037 Model No: CS2006ZM06
In /boot/firmware/config.txt
camera_auto_detect=0
dtoverlay=imx477
Is this likely to matter?
The marketing dates for the HQ Camera are stated as 2020 and 2023.
Have you heard of Sony MX477 and Sony IMX477 before?
Kevin.
On the back of my HQ Camera "Raspberry Pi 2018 HQ Camera V1.0" On the box bar code 0 633696 492738.
On the Lens box LN037 a Arducam Model Number: On a sticker: CS2006ZM06 Purchase date 10 October 2023 from an Arducam Agent.
An Arducam Support person suggested that (based on LN037) the sensor in my HQ Camera is probably a Sony MX477 not a Sony IMX477.
If this is the case can the following be relied upon?
root@raspberrypi:~# libcamera-still --list-cameras
Available cameras
-----------------
0 : imx477 [4056x3040 12-bit RGGB] (/base/soc/i2c0mux/i2c@1/imx477@1a)
Modes: 'SRGGB10_CSI2P' : 1332x990 [30.00 fps - (0, 0)/0x0 crop]
'SRGGB12_CSI2P' : 2028x1080 [30.00 fps - (0, 0)/0x0 crop]
2028x1520 [30.00 fps - (0, 0)/0x0 crop]
4056x3040 [30.00 fps - (0, 0)/0x0 crop]
The login makes no difference with regard to the output.
The purchase options were:
https://www.arducam.com/product/b0240-a ... ty-camera/
Arducam 477P High Quality Camera for Raspberry Pi, 12.3MP 1/2.3 Inch HQ Camera Module with 6mm CS Lens for Pi 4B, 3B+, 2B, 3A+, Pi Zero and more
i.e. B0240
https://www.arducam.com/product/arducam ... h-with-mf/
Arducam Lens for Raspberry Pi HQ Camera, Wide Angle CS-Mount Lens, 6mm Focal Length with Manual Focus and Adjustable Aperture
i.e. LN037 Model No: CS2006ZM06
In /boot/firmware/config.txt
camera_auto_detect=0
dtoverlay=imx477
Is this likely to matter?
The marketing dates for the HQ Camera are stated as 2020 and 2023.
Have you heard of Sony MX477 and Sony IMX477 before?
Kevin.
Statistics: Posted by kg1 — Tue Mar 12, 2024 2:00 am
